Search the web
Welcome, Guest
[Sign Out, My Account]

Quotes & Info
Enter Symbol(s):
e.g. YHOO, ^DJI
Symbol Lookup | Financial Search
XDSL > SEC Filings for XDSL > Form 10-Q on 14-May-2014All Recent SEC Filings

Show all filings for MPHASE TECHNOLOGIES INC



Quarterly Report


The following is management's discussion and analysis of certain significant factors which have affected mPhase's financial position and should be read in conjunction with the accompanying financial statements, financial data, and the related notes.


Some of the statements contained in or incorporated by reference in this Form 10-Q discuss the Company's plans and strategies for its business or state other forward-looking statements, as this term is defined in the Private Securities Litigation Reform Act of 1995. The words "anticipate," "believe," "estimate," "expect," "plan," "intend," "should," "seek," "will," and similar expressions are intended to identify these forward-looking statements, but are not the exclusive means of identifying them. These forward-looking statements include, among others, statements concerning the Company's expectations regarding its working capital requirements, gross margin, results of operations, business, growth prospects, competition and other statements of expectations, beliefs, future plans and strategies, anticipated events or trends, and similar expressions concerning matters that are not historical facts. Any forward-looking statements contained in this Quarterly Report on Form 10-Q are subject to risks and uncertainties that could cause actual results to differ materially from those results expressed in or implied by the statements contained herein.


mPhase, a New Jersey corporation founded in 1996, is a publicly-held company with over 23,000 shareholders and approximately 9,672,971,6661 shares of common stock outstanding. The Company's common stock is traded on the Over the Counter Bulletin Board under the ticker symbol XDSL. We are headquartered in Norwalk, Connecticut with offices in Little Falls, NJ. mPhase shares common office space with Microphase Corporation, a privately held company. Microphase is a leader in the field of radio frequency and filtering technologies within the defense and telecommunications industry. It has been in operation for over 50 years and supports mPhase with both engineering and administrative and financial resources as needed.

mPhase is a development stage company specializing in microfluidics, microelectromechanical systems (MEMS) and nanotechnology. mPhase is in the process of commercializing its first nanotechnology-enabled product for military and commercial applications - The Smart NanoBattery providing Power On Commandô. The new patented and patent pending battery technology, based on the phenomenon of electrowetting, offers a unique way to store energy and manage power. Features of the Smart NanoBattery include potentially infinite shelf life, environmentally friendly design, fast ramp to power, programmable control, and direct integration with microelectronic devices.

The platform technology behind the Smart NanoBattery is a porous nanostructured material used to repel and precisely control the flow of liquids. The material has a Smart Surface that can potentially be designed for other product applications including medical oxygen generation, hot/cold packs and emergency lighting.

mPhase has completed a Phase II Small Business Technology Transfer Program (STTR) grant, part of the Small Business Innovation Research (SBIR) program, with the U.S. Army for continued development of a reserve Smart NanoBattery for a critical computer memory application.

Since our inception in 1996, we have been a development-stage company and operating activities have related primarily to research and development, establishing third-party manufacturing relationships and developing product brand recognition, and since July 1, 2007, we have focused primarily upon development of our smart reserve battery and other battery and illuminator products.

During fiscal year beginning July 1, 2013, the Company has developed and sold its new automotive battery jump starter or jump-it product through its wholly-owned subsidiary mPower Tecnologies, Inc. The Company considers this to be a core product and anticipates developing both larger and smaller products of a like-kind in order to accommodate the requirements of the marine, snow mobile and motorcycle industry as well as the need for trucks and vehicles with considerablely larger batteries than those contained in an automobile.

Description of Operations Microfluidics, MEMS, and Nanotechnology

In February of 2004, mPhase entered the business of developing new products based on materials whose properties and behavior are controlled at the micrometer and nanometer scales. (For reference, a micrometer or micron is equal one millionth (10 -6) of a meter and a nanometer is one billionth (10 -9) of a meter - the scale of atoms and molecules. A human hair is approximately 50 microns in diameter, or 50,000 nanometers thick.) The Company has expertise and capabilities in microfluidics, microelectromechanical systems (MEMS), and nanotechnology. Microfluidics refers to the behavior, precise control and manipulation of fluids that are geometrically constrained to a small, typically micrometer scale. MEMS is the integration of mechanical elements, sensors, actuators, and electronics on a common silicon substrate through microfabrication technology. Nanotechnology is the creation of functional materials, devices and systems through control of matter (atoms and molecules) on the nanometer length scale (1-100 nanometers), and exploitation of novel phenomena and properties (physical, chemical, biological, mechanical, electrical) at that length scale. In its Smart NanoBattery, mPhase exploits the physical phenomenon of electrowetting by which a voltage is used to change the wetting properties of a liquid/solid interface at the nanometer scale. Consider water as the liquid. Through electrowetting, mPhase can change a surface from what is referred to as a hydrophobic ("water fearing") state to a hydrophilic ("water loving") state. In the hydrophobic state, the water beads up or is repelled by the surface. In the hydrophilic state, the water spreads out or is absorbed by the surface. The ability to electronically control the wetting characteristics of a surface at the nanometer scale forms the basis of mPhase's nanotechnology operations and intellectual property portfolio.

In the Smart NanoBattery application, mPhase uses electrowetting as a new technique to activate or literally "turn on" a battery once it is ready to be used for the first time. At the heart of the Smart NanoBattery is a porous, nanostructured superhydrophic or superlyophobic membrane designed and fabricated by mPhase. The so-called superhydrophobic membrane applies to water and the superlyophobic membrane applies to nonaqueous or organic liquids such as ethanol or mineral oil. The difference between the two membrane types lies in the nanoscale architecture at the surface. By virtue of its superhydrophobic or superlyophobic character, the membrane, although porous, is able to physically separate the liquid electrolyte from the solid electrodes so that the battery remains dormant or inactive, thus providing no voltage or current until called upon. This electrolyte-electrode separation gives the battery the feature of potentially unlimited shelf life and the benefit of being always ready when needed, which is not necessarily the case for conventional batteries. Electrowetting alters the liquid/membrane interface so that the liquid is now able to flow over the membrane's surface and rapidly move through the pores where it is able to contact the solid electrode materials located on the other side of the membrane.

mPhase uses MEMS to precisely control the machining of silicon-based materials at the micrometer and nanometer scales. This ability has led to the Company's proprietary membrane design that controls the wetting and movement of liquids on a solid surface. mPhase uses microfluidics to control the flow of liquid electrolyte through the porous membrane and this is also the basis for other possible applications such as self-cleaning surfaces, filtration and separation and liquid delivery systems.

History of Nanotechnology Operations Smart NanoBattery

mPhase Technologies along with Bell Labs jointly conducted research from February 2004 through April of 2007 that demonstrated control and manipulation of fluids on superhydrophobic and superlyophobic surfaces to create a new type of battery or energy storage device with power management features obtained by controlling the wetting behavior of a liquid electrolyte on a solid surface. The scientific research conducted set the ground work for continued development of the Smart NanoBattery and formed a path to commercialization of the technology for a broad range of market opportunities. During 2005 and 2006, the battery team tested modifications and enhancements to the internal design of the battery to optimize its power and energy density characteristics, as well as making engineering improvements that were essential in moving the battery from a zinc-based chemistry to a commercial lithium-based chemistry that can be manufactured on a large scale. The Company began its efforts by entering into a $1.2 million 12 month Development Agreement with the Bell Labs division of Alcatel/Lucent for exploratory research of control and manipulation of fluids on superhydrophobic surfaces to create power cells ( batteries) by controlling wetting behavior of an electrolyte on nanostructured electrode surfaces. The goal was to develop a major breakthrough in battery technology creating batteries with longer shelf lives as the result of no direct electrode contact (meaning no power drain prior to activation). The Company extended its development effort twice for an additional 2 years ending in March of 2007 and for two additional periods thereafter through July 31, 2007. During this time, the technical focus shifted from trying to separate the liquid electrolyte from nanostructured electrodes to developing a nanostructured membrane that could physically separate the liquid electrolyte from the solid electrodes.

mPhase also began working with the Rutgers University Energy Storage Research Group (ESRG) in July of 2005 to conduct contract research in advanced battery chemistries involving lithium. This work involved characterizing and testing materials that could be used in the mPhase battery. In July of 2007, the relationship shifted to a collaboration focused on developing a memory backup battery needed by the U.S. Army. The work was funded through a Phase I Small Business Technology Transfer Program (STTR) grant.

In July of 2007, mPhase formed a new wholly-owned subsidiary, Always Ready, Inc., to focus on the development of its nanotechnology products. The Company has used this subsidiary as a division of the Company in order to develop increasing brand recognition of its battery product. The Company decided in September of 2007 to transfer its development work out of Bell Labs (Alcatel/Lucent) in order to broaden its nanotechnology product commercialization efforts. Prior to such time mPhase was limited to development using zinc-based batteries since Bell Labs did not have facilities to handle lithium chemistry. mPhase continued to work with Rutgers ESRG that has facilities capable of handing lithium battery development and also engaged in work with other companies to supply essential components, fabricate prototypes, and plan manufacturing approaches. These companies included a well-respected silicon foundry and battery manufacturer.

In February of 2008, the Company announced that a prototype of its Smart NanoBattery was successfully deployed in a gun-fired test at the Aberdeen Proving Ground at Maryland. The test was conducted by the U.S. Army Armament Research and Development and Engineering Center (ARDEC) of Picatinny, New Jersey. The battery not only survived the harsh conditions of deployment at a gravitational force in excess of 45,000 g, but was also flawlessly activated in the process.

In March of 2008, mPhase announced that it had been invited to submit a proposal for a Phase II STTR grant based upon the successful work it had performed on the Phase I grant to develop a version of the Smart NanoBattey referred to as the multi-cell, micro-array reserve battery for a critical U.S. Army memory backup application. The Phase II grant in the gross amount of $750,000 (net $500,000) was granted to the Company in the middle of September of 2008. In March of 2008, the Company also announced the successful transfer to a commercial foundry of certain processes critical to the manufacturing of its Smart NanoBattery. This enabled fabrication of the porous membranes for the multi-cell, micro-array reserve battery mentioned above. The Company successfully manufactured nanostructured membranes at the foundry that are essential to commercial production of the battery. By achieving a series of delayed activations, the shelf-life and continuous run-time of such battery is increased to a period of time in excess of twenty years. In April of 2008, the Company announced that it had successfully activated its first Smart NanoBattery prototype by electrowetting using a hard-wired configuration and a remotely-activated device. Remote activation plays a key role in providing power to wireless sensors systems and RFID tags.

Also, in April of 2008, the Company announced that it had successfully produced its first lithium-based reserve battery with a soft or pouch package and breakable separator (in place of the electrowettable membrane) that relies on mechanical rather than electrical activation to provide Power On Commandô. The Company believes that it is a significant milestone in moving from a low energy density zinc-based battery to a higher energy density lithium-based battery towards proving that the Smart NanoBattery will eventually be economically and commercially viable.

In fiscal years ended June 30, 2009 and June 30, 2011, the Company focused upon further development of its Smart Nano Battery under a Phase II STTR grant from the U.S. Army as a potential reserve battery for a back-up computer memory application for a weapons system. The Company has recently completed such Phase II Army grant. On November 12, of 2010, the Company announced that it had successfully triggered and activated its first functional multi-cell smart nano battery. Triggering and activation of the cells of the battery were achieved by using the technique of electrowetting or programmable triggering. Triggering was accomplished by applying a pulse of electrical energy to a porous, smart surface membrane located inside each cell in the battery causing the electrolyte to come in contact with the cell's electrodes, creating the chemical reaction to produce voltage inside of the multi-cell battery. The multi-cell battery consists of a matrix of 12 individual cells populated with an electrode stack consisting of lithium and carbon monofluoride materials with each rated at 3.0 volts. Using a custom designed circuit board for testing, each of the cells in the battery were independently triggered and activated without affecting any of the non-activated cells in the multi-cell configuration. Each cell in the battery has a very long shelf-life prior to triggering.

On February 9, 2011, the Company announced that it had signed a 3 year Cooperative Research and Development Agreement (CRADA) with the U.S. Army Armament Research, Development, and Engineering Center (ARDEC) at Picatinny, New Jersey, to continue to cooperatively test and evaluate the mPhase Smart NanoBattery, including new design features functionally appropriate for DoD based systems requiring portable power sources. The army researchers are evaluating the prototypes using the Army's testing facilities at Picatinny Arsenal in New Jersey in order to determine applicability of the technology to gun fired munitions and potentially to incorporate the technologies into research and development and other programs sponsored by Picatinny. The Research Agreement is supported by the Fuze & Precision Armaments Technology Directorate.

During fiscal year ended June 30, 2011, the Company completed work on its Phase II STTR grant for the U.S. army for a nano-reserve battery for a back-up computer memory application. In addition the Company engaged First Principals, Inc to perform an evaluation or each of its patents in order to identify a strategic partner whose products line will need the Company's SmartNanoBattery as a compelling solution.

On March 6, 2012, the Company announced that it is exploring the printing of its Smart NanoBattery on graphene and other new advanced materials. Graphene is a very strong material that has been described as the most conductive material known, making it a vast improvement over silicon. Graphene has the potential to lead to faster, cheaper and more flexible devices including power sources

On August 16, 2012, the Company announced that it had received a notice of allowance for a patent from the U.S. patent office for a reserve battery utility patent. The techniques described in the patent are for creating a battery system that is easily activated via a low energy mechanical force, thus allowing the reserve battery to be used in a wide variety of consumer related and non-consumer related electrical devices. The invention generally relates to a reserve battery, which includes a battery case having an electrolyte compartment at a first end and an electrode compartment at a second end, a first terminal having an external button connected to the case at the first end, and a second terminal connected to the case at the second end. A movable ampoule is movably positioned within the electrolyte compartment. A bias member is located within the case between the external button and the ampoule, and a porous cutter is positioned within the case between the electrodes and the ampoule and supported by an inverted U-shaped support structure. When an external force is applied to the external button, the bias member transfers an internal force to the ampoule to cause the ampoule to engage the cutter and allow the electrolyte to release thus activating the battery.

On August 23, 2012, the Company announced that, subject to the availability of sufficient funding, it will engage in further development of its SmartNanoBattery to make it rechargeable.

On September 13, 2012, the Company announced that it had received a notice of allowance of a new patent from the U.S. patent office for a modular device. The invention generally relates to a handheld, powered device containing at least one power module having at least one battery, wherein the power module is removable and separately connects to each of the load modules. The patent covers a modular device for providing multiple modular components that may be interchanged as desired. A system for providing a modular device for use in emergency or everyday applications and having a plurality of modular components that are interchangeable with one another depending on the particular desired use.

On October 26, 2012, the Company announced the development of a prototype of a new product "the mPower Jump" designed by Porsche Design Studio and Porsche Engineering as an automatic jump starter for a dead car battery. The device is portable, light in weight and small in size designed to fit in the glove compartment of most cars.

On January 24, 2013, the Company announced that it had received a notice of allowance from the U.S. patent office of a patent covering a device for fluid spreading and transport. The invention relates to a single porous substrate formed from a network of filaments wherein the network of filaments is comprised of a first plurality of filaments and a second plurality of filaments is exposed to a surface modification treatment and the second plurality of filaments is covered with a conformal coating. A wetting region comprised of the first plurality of filaments extends through a first portion of the porous substrate and is permeable to fluid transport and a non-wetting region comprised of the second plurality of filaments which is operable to switch between a wetting and non-wetting state by an electrical source coupled to the second plurality of filaments.The invention protects a porous substrate with integrated wetting and non-wetting regions and is a key patent win for the Company relative to the protection of its intellectual property in the area of microfluid dynamics.

On January 30, 2013, the Company announced that it had received a patent from the U.S. patent office for a reserve battery system. The invention patented generally relates to a battery system that is easily activated via low mechanical force thus allowing a reserve battery to be used in a wide variety of consumer related and non-consumer related electrical devices.

On February 12, 2013, the Company announced that it has filed a United States Letter Patent application for a novel drug delivery system based on its Smart Surface technology.The drug delivery patent is based on mPhase's Smart Surface technology electronically or manually enabling the precise control of a fluid on a nano-structured surface.The drug delivery system generally relates to a drug delivery system for automatically dispensing a pre set dosage of a drug agent or medication.

On June 18, 2013, the Company announced that it had received the Frost & Sullivan award for its Innovative nano battery technology. Frost & Sullivan noted that the smart nanobattery is sustainable, cost-effective, easy to handle, and possesses a long shelf life, all of which clearly differentiate it from competing battery technologies. Frost & Sullivan further noted that this positions the technology to enhance the effectiveness of conventional batteries and encourage widespread use of reserve batteries.

On October 31, 2013, the Company announced that it had developed a cost-reduced version of its automotive battery jump starter product designed to appeal to the mass market. The Company has commenced selling this product in December of 2013 and has sold approximately 600 units through March 31, 2014.

Emergency Flashlight

On December 5, 2008, mPhase Technologies, Inc. signed a contract with Porsche Design Gesellschaft m.b.H. in Austria ("Porsche Design' Studio"), to design a premium version of the AlwaysReady Emergency Flashlight. A pilot program that began in March of 2010 has resulted in the sale of approximately 84 emergency flashlights. The flashlight sold in the pilot program contained mPhase's proprietary mechanically-activated lithium reserve battery. The battery contains a breakable barrier that separates the solid electrodes from the liquid electrolyte until the battery is manually activated. Unlike traditional batteries, the mPhase battery remains in an inert state with no leakage or self-discharge until activation. The mPhase battery is designed to have an almost infinite shelf life making it ideal for emergency lighting applications. The premium flashlight will be marketed as an accessory for automobile roadside emergency kits. The Company maintains a small inventory of this product which it continues to sell but does not, at this time, consider it a core product.

mPower Jump-It

During fiscal year ended June 30, 2013, the Company announced that it had received prototypes of a new automotive product developed for it by Porsche Design Studio and Porsche Engineering .The mPower Jump is a rechargeable, compact device designed to jump start a dead battery in an automobile. The mPhase Jump is rechargeable in a significantly shorter period of time than other jump starters and has a much smaller footprint enabling it to fit in the glove compartment in most cars. The Company, announced on October 31, 2013 that it has also created a cost reduced version for the mass market and engage initially in low volume production and global distribution of the product. The Company views this product as one of its core strategic products.

IPTV and Magnetomer

The Company has discontinued these products.


Revenues. Since July 1, 2007, quarterly revenue, if any, has primarily been attributable to grants from the United States Army and testing arrangements involving its nanotechnology products. The Company is not currently working on any research in connection with government grants. The Company plans to apply for further STTR and SBIR grants with respect to its nanotechnology research and product development efforts. The Company also derived minor revenues in connection with sales of its emergency flashlight product under an initial pilot program that commenced in March of 2010. The Company is begining to create revenues from its cost reduced mass market version of its automotive jump starter product. For the quarter ended March 31, 2014, the Company generated $255,113 revenues from this product.

Cost of revenues. Cost associated with revenues from Army Grants and fees for testing our nanotechnology products is currently very low. It is anticipated that the Company's cost of revenues will increase significantly as the Company moves forward with the commercialization and distribution of its jump-it product as well as new products involving both smaller and larger jump starter products to start various sizes of batteries.

Research and development. Research and development expenses have consisted principally of direct labor and payments made to various outside vendors including Porsche Design Studio and Microphase Corporation in connection with the Company's Emergency Illuminator and Automotive Battery Jump Starter products and to Silex, a foundry located in Sweden, as well as other third party vendors involved in the development of the nanotechnology products. All research and development costs are expensed as incurred. Such expenses are expected to increase in the next fiscal year as the Company continued development of its Smart Nano Battery.

General and administrative. General and administrative expenses consist primarily of salaries and related expenses for personnel engaged in its nanotechnology product line, legal and accounting personnel. In addition the Company from time to time will use outside consultants. Certain administrative activities are outsourced on a monthly fee basis to Microphase Corporation and mPhase leases its office in Norwalk, Connecticut from Microphase Corporation.

Non-cash compensation charges. The Company makes extensive use of stock, stock options and warrants as a form of compensation to employees, directors and outside consultants. We incurred non-cash compensation charges totaling $19,878,511 from inception (October 2, 1996) through March 31, 2014.

Other Income (Expense). Included in Other Expense are non-recurring items related to the change in the value of derivative securities and amortization as related debt discount. Such amounts will fluctuate significantly and should not be considered as recurring or in any way indicative of operating results. In addition, it has been the Company's policy to record as an expense the cost of re-pricing securities (Reparation Cost) to raise capital.

Cumulative losses, net worth and capital needs

The Company has incurred cumulative development stage losses of $206,311,978 and negative cash flow from operations of $90,267,267 from inception through March 31, 2014. The auditors' report for the fiscal year ended June 30, 2013 includes the statement that "there is substantial doubt of the Company's ability to continue as a going concern". As of March 31, 2014 the Company had a negative net worth of ($3,564,732) compared to a negative net worth of ($4,895,496) as of June 30, 2013 as a result of continuing net losses, reduced in the current three months primarily by conversions of convertible notes and accrued interest in excess of the net loss for the current period.

The Company has convertible notes outstanding with three different holders as of March 31, 2014. The Company has significant overhang from funded and unconverted . . .

  Add XDSL to Portfolio     Set Alert         Email to a Friend  
Get SEC Filings for Another Symbol: Symbol Lookup
Quotes & Info for XDSL - All Recent SEC Filings
Copyright © 2015 Yahoo! Inc. All rights reserved. Privacy Policy - Terms of Service
SEC Filing data and information provided by EDGAR Online, Inc. (1-800-416-6651). All information provided "as is" for informational purposes only, not intended for trading purposes or advice. Neither Yahoo! nor any of independent providers is liable for any informational errors, incompleteness, or delays, or for any actions taken in reliance on information contained herein. By accessing the Yahoo! site, you agree not to redistribute the information found therein.